Solving Konqueror cannot display Chinese

Just installed the KDE on my Ubuntu, and the Internet explorer comes with the KDE is the Konqueror, however the first time  I was using the Konqueror found it cannot display the Chinese properly, all becomes gubbish characters, found the solution by google, by copying the fonts from the windows system, 1, mount the windows C drive, you needs to see the hard drive name of the C drive sudo mount /dev/hda1 /mnt/c 2, copy the fonts from the windows font folder Windows font folder is as: /mnt/c/windows/Fonts Destination Ubuntu folder is as: /usr/share/fonts I copied as many fonts as possible, not sure which one took effect, which includes: msmincho.ttc msgothic.ttc mingliu.ttc arial.ttf cour.ttf micross.ttf per_____.ttf verdana.ttf batang.ttc gulim.ttc mingliu.ttc simsun.ttc, simsun.ttc etc.

Ubuntu wireless network connection in command line

After installed the the graphical card driver in Ubuntu, the gnome desktop was not working anymore, needs to install and setup the wireless network in command line, herewith the procedure, 1, scan the available wifi network, sudo iwlist scan 2, receive the wifi network password   wpa_passphrase YOURSSID YOURWIFIPASSWORD the result is similar as:   network={ ssid="YOURSSID" #psk="YOURWIFIPASSWORD" psk=fe727aa8b64ac9b3f54c72432da14faed933ea511ecab1 5bbc6c52e7522f709a } 3, edit the /etc/network/interfaces   sudo vim /etc/network/interfaces my configuration is as:   auto wlan0 iface wlan0 inet dhcp gateway 192.168.2.1 wpa-psk "the password psk just generated" wpa-ssid "YOURSSID" 4, restart the network and wlan0   sudo /etc/init.d/networking restart     sudo ifdown wlan0 sudo ifup wlan0   5, problem encountered, canno access the external network   ping 8.8.8.8 failed, ping www.google.com failed.

LVM test

Did some LVM test, recorded the procedure, I have a disk having space as 160G,  showing as: [root@localhost ~]# fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes, 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x210edd27 Device Boot      Start         End      Blocks   Id  System /dev/sda1            2048    83891429    41944691   82  Linux swap / Solaris /dev/sda2        83891430   167782859    41945715    7  HPFS/NTFS/exFAT /dev/sda3       167782860   251674289    41945715    7  HPFS/NTFS/exFAT /dev/sda4       251674290   312576704    30451207+   c  W95 FAT32 (LBA) 1, create a VG(volume group), the PE(physical extend) as 16M, name as xiongvg, then add the sda4

partition encryption in LVM

Tested the partition encryption of LVM in RHEL6 1, vgs -report information about volume group 2, lvs-report the information about logical volumes 3, create the logic volume, size 100M  lvcreate -n lv_lockbox -L 100M vgsrv 4, format the logic volume just created mkfs.ext4 /dev/vgsrv/lv_lockbox 5, create the mount point mkdir /mnt/lockbox 6, for security reasons, dump random data to the logic volume created cat  /dev/urandom > /dev/vgsrv/lv_lockbox 7, create the encryption partition based on step 4, here needs to input the passphrase.